Solid Ideas to Implement to Effectively Prevent Slip and Fall Accidents

The key to preventing most slipping and fall injuries is simply following a few common-sense guidelines. Take the extra time to identify the potential hazards in your home to reduce your risks of slipping and falling.

Clear clutter from the living room (recycle furniture, pick up books, shoes, toys, magazines, etc. ), use caution around high chairs (low furniture like ottomans and coffee tables) and be careful about stairs. This particular Slip Solution is for starters a surefire way to prevent falls.

Common hazards in the home include trips to the sidewalk, parking areas, stairs, and elevators. Preventive measures can be as simple as walking around such areas when possible and removing clutter from your home. Keep family members, pets, and children away from such hazards. You can also install grab bars on your stairs to prevent a fall.

A quick way to protect yourself from trips and falls in the home is to practice anti-slip moves in your driveway or parking lot. For instance, if you have a driveway or parking lot, try to keep large pieces of furniture (such as a sofa or chairs) away from foot traffic. Place heavy pieces of furniture on non-slippery surfaces (like concrete or gravel) instead.

Preventing falls and slips from occurring during the winter months is best done by planning ahead. Make sure you empty parking lots and driveways before the snow starts. When empty, clear large surfaces (like sidewalks and parking lots) of snow and ice. If it’s really cold, have blankets and coats with you so you can spend some time outdoors.

Prevent trips and falls by using non-slippery floors. Floors made of hardwood, tile, and carpet are more slippery than linoleum or acrylic surfaces. Linoleum and acrylic floors are relatively safe if they are maintained properly.

Hardwood floors, on the other hand, are not only unsafe when bare of snow or ice, but they tend to discolor quickly and give off an oily substance that attracts moisture. In addition to preventing slips and trips, workers need to consider their protective gear.

The most common type of protective gear is a hard hat, elbow and knee pads, and steel-toe boots. Workers need to also use handguards (which can be purchased at most hardware stores). Workers also need to take steps to avoid chemicals and substances that can contribute to slips and trips.

Many chemical cleaners and solvents (commonly found in garage and house cleaning products) can be hazardous to your health; therefore, they should strictly be kept away from work areas. Goggles and mouthguards are other items that are vital in preventing slips and trips.

Workers should wear goggles or face masks to protect their eyes from particles and fumes that can be released during cleaning and maintenance activities. Some materials, such as paints and varnishes, may trigger allergic reactions, which could increase the risk of a slip or trip.

Workers also need to wear appropriate protective gloves (such as rubber gloves) while handling said substances. Aside from protecting their hands and forearms, gloves also cover the knuckles and the tip of the workers’ fingers.

Lastly, you should pay special attention to your working surfaces. As previously mentioned, floors should be non-slippery, clean, and dry. Always keep in mind that if there is debris or substances (such as paint and oil) on your working surfaces, workers should make sure that they do not come in contact with them.

This is especially important if you’re doing renovation or remodeling of rooms in your home: removing debris from the surfaces of your rooms will prevent unwanted slips and trips. As for working equipment, one of the most important safety devices you should always have on hand is a rock salt pan.

Rock salt causes slippery conditions on surfaces – plain and simple. Keep a supply of rock salt on hand at all times so that you can easily remedy any situation that arises. Rock salt can also save you a lot of trouble, especially if you are working in a place with slippery surfaces such as snow or ice.

Preventing slips and falls is one way to protect yourself and your workers from occupational hazards. Although most employers will try to find ways to lessen the risks of slips and falls, sometimes it is better to simply do everything possible to avoid such accidents.

For instance, you shouldn’t keep your indoor skylights and patio doors open at night. If your business requires frequent access to outdoor areas, like a garden, then you should also put in place measures to protect employees from falls and emergencies.

Preventing slips and falls on stairs is very important because this is where most falls occur. Most of the time, you will only ever find one or two reports of slips on stairs each year. However, you can prevent most slips and falls by using stairs that are not too steep, are well lit, and have railings or handrails.

Keep in mind that your safety requirements may vary depending on the type of business you run. It is therefore important to talk to your doctor about what precautions you need to take, whether they pertain to you or your employees.